Setup guide

BX2

• Cameras sited indoors where there is very little background movement can be set to Indoor high

or Indoor low sensitivity.

The sensitivity levels are:

• Indoor High (most sensitive setting).

• Indoor Low.

• Outdoor High.

• Outdoor Low.

• Very Low (lowest sensitivity level).

Activity Grid

A 16 x 16 grid can mask areas where activity detection is enabled. Select ‘Setup’ and follow the on-screen menus

to congure the activity grid.

Note: An NTSC video source will display an activity grid of 16 x 14.

Use direction keys to navigate grid

Use camera 1 key to toggle cells on/off

Use camera 2 key to latch selection

Press MENU/MODE key to start setup

Press MENU/MODE key again to exit grid

When you enter the Activity Grid screen, a 16 x 16 grid will overlay the image. Edit the grid so that it covers

the areas of the image that require monitoring for activity detection and remove the monitoring from the

areas where there may be continuous movement (e.g. trees, bushes) causing false triggers. Each cell can be

individually enabled or disabled with the Camera 1 button.

Alternatively it is possible to latch the cursor and select a group of cells to enable / disable. To latch the cursor,

move it to the required start location and press Camera 2. Use the cursor keys to move across the cells to be

enabled / disabled and then press Camera 1 to toggle all the selected cells on or off.

Actions

Actions to be automatically activated when VMD is identied can be congured within this menu.