Setup guide

Dedicated Micros ©2007
62
BX2
Sequence Dwell
The sequence dwell time can be set from 1 to 99 seconds. The dwell time is the length of time a camera is
displayed before switching to the next camera in the sequence.
Tip: The cameras on the sequence can be edited by pressing and holding the Sequence button in Live
mode.
Multiscreen Interlace
Image icker can be eliminated from a multiscreen display by turning the Multiscreen Interlace feature On.
Multiscreen titles
Camera titles can be removed when viewing in a multiscreen display.
Display unit number
When multiple units are controlled from a single keyboard (e.g. using a VS16 video switch), the unit number (in
the System Options page) is displayed on screen so the operator knows which unit they are controlling.
Base camera number
When using multiple units, it may be preferred that the camera numbers are offset, for example, with two units
the rst unit would be camera 1 to 16 and the second 17 to 32, etc. This is for display purposes only.