Setup guide
Dedicated Micros ©2007
55
BX2
Page
Goto Camera Preset
Apply zone 01 actions to
Page 3
Disabled
Zone 02
Enabled
Zones 02 - 32, All zones
Zone
0
1 Actions
Goto Camera Preset
It is possible to action a camera to be sent to a preset position when an alarm zone is triggered.
Highlight the option and press the
button to enable this feature.
When enabled a Preset and Camera option will be displayed. Use the
button to move to the preset option,
press the or to scroll through the preset options.
Use the
to move to the Camera, use the or to scroll through the camera numbers. This is the camera that
will be automatically sent to the selected preset position.
Apply Zone
It is possible to apply one conguration to any other zone (there are 32 congurable zones) individually or
apply to all zones. This will save on conguration time when zone action requirements are the same or similar.
Primary Camera for Zone
Zones can be congured to contain one or more cameras.
A still image from the Primary Camera will be:
Used for ‘E-mailing on Alarm’.
Added to the event database.
Will be the rst to be displayed (if enabled) on the Operator’s monitor.
Zones that contain more than one camera require this primary camera reference.
Select Zone Cameras
The cameras that are to be switched to event rate by the zone actions can be individually selected, or all
cameras can be switched.
When the selected cameras option is enabled, use the corresponding camera key to include / exclude that
camera from the zone conguration.
General Contacts
It is possible to congure the alarm contacts independently of camera specic alarms for specialist applications.