Setup guide

BX2

Weekend Notication

This option allows the BX2 to notify the Operator that the unit has been switched into weekend operation

mode by automatically closing the relay output when this occurs. Any of the AUX relays or the additional relay

modules can be selected.

It is possible to check the status of the relays once congured by using the Relay Test menu.

Relay test

The relay test option provides access to a submenu where any of the relays (on-board and additional relay

module) can be tested, i.e. manually triggered.

Highlight the relay test option and select Edit, this will display the submenu.

Relay Test

Module 2 Relay 1 Off

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Move the cursor to the Aux section and press to switch between the Aux and Module option (the Module

option is displayed even if the module is not detected, the menu will highlight this).

Highlight the relay option and select the relay to be tested by using the

or buttons. To test the relay,

highlight the On / Off option and press or to trigger the relay. The corresponding box will be blank if the

relay is off or lled if the relay is on.

NOTE: If the relay has been congured as the relay for the default functions the menu will identify this by

displaying ‘In Use’ alongside the relay and will not give the option to test the relay.

Advanced Alarms

These advanced alarm features support functions required for detector activated CCTV systems and ensure that

mandatory specications as outlined in the British Standard BS8418 are available for remote video installations

that require a level one Police response (effectively immediately).

Note: When one of the relay modules is selected, the number of relays for test will increase to 16.

Note: This feature is disabled by default. Once enabled, the time parameters for Alarm Entry Timer,

Alarm Exit Timer, Relays and the ability to force the unit into Day, Night or Weekend modes

become available.

Alarm entry timer

Alarm exit timer

Forced Day

Forced Night

Forced Weekend

030 sec

Disabled

000 - 999 sec

Disabled, Enabled

vance

arms