Setup guide
Dedicated Micros ©2007
44
BX2
Parameters
These are the parameters for the highlighted MPEG prole, the example shows that the image resolution for
MPEG 12.
Secondary Web Server Port
The unit can be congured to send video via a web port. If the standard web port (80) is already utilised on the
network, it is possible to congure a secondary web server port.
To view the device, via a web browser, using the secondary web port, you will need to enter the following in the
internet web address section or the unit viewing software;
http://<IP Address of the unit>:<secondary web port number>
For example; if the secondary web address allocated is 8000, with an IP address of 172.16.1.2 then the entry
would be: http://172.16.1.2:8000.
Primary DNS
The unit supports Domain Name Server allowing the unit to reference other devices by their name rather than
the IP address. Enter the IP address of the primary DNS server.
Secondary DNS
The Secondary DNS Server is a back up server in case the primary server fails. Enter the IP address of the
secondary server.
Remote Reporting
The unit supports remote alarm monitoring and can be congured to automatically carry out actions to notify
the remote station of events. This menu congures the remote reporting.
Note: It is recommended that the Remote Reporting feature be congured via the Web interface, refer
to the Networking Guide for full conguration information.
Email Settings
If the unit has been congured to transmit e-mails on alarm, camera fail, etc. It is necessary to congure the
e-mail settings.
Note: It is recommended that the Email Settings option be congured via the Web interface, refer to the
Networking Guide for full conguration information.
SMS Settings
The unit can be congured to send SMS messages under specic circumstances; alarm, system startup, etc.
This menu allows the SMS settings to be congured to allow the messages to be transferred to the SMS Server.
Note: It is recommended that the SMS Setting option be congured via the Web interface, refer to the
Networking Guide for full conguration information.
Web Cam Settings
Any of the video inputs on the unit can be made available and transmitted via FTP to a web serving device.
These images can then be incorporated into a web page and accessed via a standard web browser.
Note: It is recommended that the Web Cam Settings be congured via the Web interface, refer to the
Networking Guide for full conguration information.