Setup guide

Dedicated Micros ©2007
37
BX2
Event Prole
Select the prole recording that is to be applied when the unit switches to event recording mode, again the
options available are:
MPEG01 to MPEG12
JPEG01 to JPEG12
When this option is highlighted additional information will displayed on the screen and it is also possible to
access the edit prole screen by pressing the PLAY button, see below for more information.
Pre-trigger rate
This determines the rate the images will be continuously recorded into the pre-alarm memory and are available
for enhanced pre-alarm recording. Select a record rate in PPS (or ms) to be recorded on the camera being
congured.
Pre-trigger time
It is possible to specify the amount of pre-alarm recording that will be captured and added to the alarm
recording to be stored when an alarm is triggered
Prole Description
When a prole is highlighted, its associated description will be displayed.
Prole Parameters
The resolution, PPS and quality setting of the highlighted prole will be displayed.
Editing Recording Proles
Each of the selectable proles can be edited to suit the requirements of the particular application. The standard
proles give a broad range that will suit most applications. To edit a Recording prole, select the prole name
onscreen and press the play button.
JPEG Prole Parameters
Units
The Units option can be set to pictures per second or millisecond.
Prole
This identies the prole that is being congured and can not be selected.
Description
It is possible to allocate a description to each of the proles to allow the Operator to easily identify the selected
prole, use information that is relevant to the settings.
Resolution
The resolution can be select from High, Medium or Low. The corresponding resolution settings can be changed
by selecting the Edit option which will display the JPEG Image sizes screen.
Record rate
This identies the record rate for the selected prole and can be from 00 PPS to 25PPS (PAL) or 30PPS (NTSC)
(40ms PAL or 33ms NTSC). For record rates of less than 1PPS use the milliseconds option which allows settings
of 1000ms to 99999ms. Selecting 00PPS will create a dummy prole that will not record. Use this dummy prole
as a Normal Prole for event recording only.