Setup guide

BX2

The options are:

• On - Night settings would be permanently applied.

• 7 Day Timer - This activates a sub menu where Day and Night times can be allocated, refer to the 7

Day Timer section.

• On between - this allows the start and end times to be set when the Night settings will be applied.

• Off - When the night option is off the Day settings will be applied at all times (default).

It is possible for a designated remote operator to temporarily override these settings if the unit is

congured to allow this. For more information, refer to Advanced Alarm Settings.

7 day Timer

This sub-menu allows a schedule to be independently set for each day of the week.

7 Day Timer

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Timed

24Hr Day

24Hr Night

24Hr Day

Day

09:00

Night

18:00

24 Hr Day

This enables the unit to record using the Day settings at all times.

24Hr Night

This enables the unit to record using the Night settings at all times.

Timed

The schedule will enable the Day settings during a set period and then switch automatically to the Night

settings at a programmed time. The diagram shows that the unit will be active with the Day settings from

09:00 on Monday until it switches to the Night settings at 18:00. This is repeated each day until Friday when the

settings will be switched to Day then over to Night settings on Saturday and back to Day on Sunday.

Weekend

The weekend option allows times to be congured to determine when the weekend settings would be applied.

The options are:

• On between - this allows the start and end times to be set when the weekend settings will be

applied.

• Off - When the weekend option is off the weekend setting will never apply.