Setup guide

BX2

Time, Date & Language

Time & Date

Date Format

Language

System shutdown

Timezone

15:38 22/11/2005

Day, Month

English

Disabled

Greenwich Mean Time GMT +0

Month, Day

See below for full list

Enabled

Time, Date

Lan

Date

As default, the date is entered DD:MM:YYYY, this can be changed using the Date format option below.

Time

The time should be entered in 24 hour format (HH:MM).

Note: The Daylight Saving Time setting is indicated by ‘S’ for summertime and ‘W’ for wintertime

Language

The menus on the unit can be displayed in a number of languages.

Available languages include: English, French, Chinese, German, Spanish, Italian, Russian, Czech, Polish, Dutch,

Hungarian, Swedish, Finnish and Croatian.

System Shutdown

The unit can be shutdown from this menu.

Some menu changes would require the unit to be reset, for example changes within the System Features menu.

To reset the unit:

1. Use the

key to highlight the ‘System Shutdown’ option.

2. Select Enable, a prompt will be displayed.

3. Press and hold the Camera 1 key for ve seconds. The unit will shutdown, where a prompt will

appear to say you can switch the unit off.

To abort the reset, press the Menu or Mode key.

Note: Shutting down the unit by any other method will put the integrity of your DVR at risk. If the unit

is shut down in any uncontrolled manner (power off at mains or removing the power lead) more

than ve times in one hour, it will go into Engineering Bootloader mode for approximately fteen

minutes and will then reboot in normal mode.

Tip: The unit can be restarted from the ‘System Shutdown’ option by pressing and holding Camera 4.

Time Zone

There are numerous time zones supported on the unit, select the zone for where the unit is installed so the time

and date will reect the local time and will change in conjunction with Daylight Saving Time.