Product data

[Project Number] [Project Name]
[Date] [Project Location]
28 10 00 7
Electronic Access Control/Intrusion Detection
i. Determining operational requirements and planning/designing the system.
ii. Installing and integrating Access Control, Alarm Monitoring, Alarm Systems,
DVR/NVR, Time and Attendance, Visitor Management interfaces and related se-
curity and door hardware.
iii. Configuring local access panels and ACS host communications.
iv. Installing proper communication connections between the host system, access
panels, and the related hardware.
v. testing the security management system communication and operation.
vi. Training system operators.
vii. Testing the security management system
e) The subcontractor shall have been regularly engaged in the installation and
maintenance of integrated access control systems similar in size and scope to that is
outlined herein for a period of no less than five (5) years.
f) The subcontractor shall supply manufacturer’s documentation attesting to the fact that
his/her firm is a competent factory trained service branch capable of maintaining the
system with reasonable service time.
g) The subcontractor shall provide a minimum of three (3) references whose systems are
of similar complexity and have been installed and maintained by the subcontractor
in the last five (5) years.
h) There shall be a local representative and factory authorized local service organization,
which will carry a complete stock of parts and provide maintenance for these systems.
Local shall be defined as an area in a [ ] mile radius of [ ] with a response
time of [ ] hours.
4. Alternates:
a. Only the manufacturer’s equipment that is explicitly mentioned in this specification is supplied.
Substitutes are not allowed.
b. Equivalence: No item shall be substituted without the prior written and approved documentation
that assures that the substituted part/parts are exactly the same, technically and aesthetically
speaking. The substituted parts must provide the same or significantly improved performance.
1.5 DELIVERY, STORAGE & HANDLING
A. Ordering: Comply with manufacturer's ordering instructions and lead time requirements to avoid construction
delays.
B. Delivery: Deliver materials in manufacturer's original, unopened, undamaged containers with identification labels
intact.
C. Storage and Protection: Store materials protected from exposure to harmful weather conditions and at
temperature and humidity conditions recommended by manufacturer.
1.6 WARRANTY
A. The Access Control Panel shall be warranted for at least 12 months from the date of system acceptance.
B. Extended warranty terms at reasonable rates shall be available from the installing dealer.
C. The system integrator shall be the focal point of all service issues or questions (with the manufacturer's full
support). The system integrator shall directly support software for the selected system product family.
D. Technical support from the manufacturer to the system integrator will not be reliant on a software maintenance
agreement between the system integrator, end user to the manufacturer.