Product data

[Project Number] [Project Name]
[Date] [Project Location]
28 10 00 35
Electronic Access Control/Intrusion Detection
b. Clean system equipment, including interior and exterior surfaces.
c. Perform diagnostics on all equipment.
d. Check and calibrate each ACS device.
e. Run system software and correct diagnosed problems.
f. Resolve previous outstanding problems.
E. Emergency Service:
1. The owner will initiate service calls when the ACS is not functioning properly. Qualified personnel shall be
available to provide service to the complete ACS. The owner shall be furnished with the telephone
number where the contractor’s service supervisor can be reached at all times. Service personnel shall be
at the site within four [4] hours after receiving a request for service. The ACS shall be restored to proper
operating condition after one [1] calendar day.
END OF SECTION
DISCLAIMER: Specification requires the sole professional judgment and expertise of the
qualified Specifier and Design Professional to adapt the information to the specific needs for
the Building Owner and the Project, to coordinate with their Construction Document Process,
and to meet all the applicable building codes, regulations and laws. CONTINENTAL ACCESS
(A NAPCO SECURITY GROUP COMPANY) EXPRESSLY DISCLAIMS ANY WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PARTICULAR PURPOSE OF THIS PRODUCT FOR THE PROJECT.