Product data

[Project Number] [Project Name]
[Date] [Project Location]
28 10 00 25
Electronic Access Control/Intrusion Detection
i. Expiration Date: The system administrator will be able to enter a date in this field to disable the
concerned badge automatically.
j. Badge Use Limit: The system administrator will be able to limit the number of times a badge holder
can use his/her badge. In order to do this, the administrator needs to enter a number from 1 to 999
into the Badge Use Limit field.
k. Photo: The system shall permit importing of existing photos or capturing new photos of the
personnel, into the cardholder database. The administrator will be able to configure the system
such that, presentation of a badge will display the concerned badgeholder’s image, in the
personnel record.
l. Track Status: When this field is checked, the system will display an event message regardless of
any other system setting(s).
m. Last Valid Access: This field will display the last reader, location, date & time at which the particular
badge was last used.
n. 48 User Definable and Searchable Text/Data Fields: The system shall include a minimum of 48
user fields divided into 4 tabs in the cardholder database. These fields can be employed for
searching personnel records.
o. Duration Use: When this field is checked, the badge holder will not be able to gain entry through an
APB reader for the specified duration use time. The duration use time will be variable and will be
able to be set by the system operator.
p. Escort: When this field is checked, any badge holder flagged as Escort required, can gain access
at the concerned reader, only when accompanied by a non-escort badge holder. The badge holder
being ‘escorted’ will have to present his/her badge prior to the escorting badge holder.
q. No transaction will be generated until both badges are presented at that reader. A time limit will
apply between the two badge swipes.
r. Extended ‘Access Time’ (for ADA Compliance): When checked, the badge holder shall be allowed
an extended amount of time to gain access through the door. The system operator will be able to
fix any length of time up to 255 seconds.
s. Anti-Passback Override: The system shall allow the system operator to exempt individual badge
holders from the anti-passback rules.
4. Batch Modify: The system software shall allow groups of cards to be created/modified by using a card
number range.
5. Searching: The system shall allow the operator to quickly find cardholder records by clicking on field titles
and entering the criteria being looked for directly into the data field.
6. Alarm Shunting: The system shall facilitate shunting of alarms by allowing certain badge holders to shunt
an input/ group of inputs automatically, on presentation of the concerned badge, at a reader.
7. Extended Shunt: If a shunt card is presented at an alarm shunt reader, the value of the Shunt Timeout will
be used to determine how long, in minutes & seconds, the door may be opened before a "Door Open Too
Long" alert is sent to the host PC.
EE. Reports:
1. Report Types: User-definable data reports will include, but are not limited to, the following information:
a. Cardholder data
b. Events
c. Alert responses
d. Access Groups
e. Facility Codes
f. Holidays
g. Hardware
h. Time & Attendance
i. Operators
j. Time Schedules
k. Panels
l. Operators
m. Badgeholders In (Muster List)
n. System settings
2. Transaction Reports: Transaction reports will be available for the following: