User manual

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx
2011-04-27 Page 46 of 65
© 2011 The Code Corporation
• 14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065 • [phone] • FAX [phone]
Reg
Setting Name
Default (hex)
Comment
173
Enable Bluetooth
®
Encryption
(enableBluetoothEncrytion)
0
0: Disable
1: Enable
Enables the standard AES 128 bit Bluetooth
®
encryption.
Note: Supported in firmware 3514+
Also see register 89
175
Rotate CR3 display and
keypad
(rotateKeypadDisplay)
0
Binary Dip Switch
Bit
Controls
Value
0 Screen Rotation 180°
0: Disable
1: Enable
1 Swap Left and Right Arrow Keys
0: Disable
1: Enable
Note: Requires reboot to take effect
Note: Supported in firmware 3546+
17f
jsMaxMemory_bytes
CR2/CR3:
600000
(6*1024*1024 or
#6291456)
CR1200: C00000
(12*1024*1024 or
#12582912)
JavaScript Maximum Memory Usage
180
jsPeakMemory_bytes
0
Read only. JavaScript Peak Memory Usage
1b2
HD Data Matrix Symbol Size
(hdf_dataMatrixSymbolSize)
CR2/3/1200: not
supported
CR2500/3500: 0
0: Normal effort (Default)
1: Increase effort
2: Max effort
Increases the decoder’s effort to find a Data Matrix symbol in
an image – HD field only.
Note: supported in firmware version 4008+
9 Radio Commands
The Host controls the radio by issuing ‘:’ commands. The following table describes the available
commands.
The ‘#’ column is the radio setting/command number (in hexadecimal) to be used with the ‘:’ command.
For example, “:%0E” gets the Bluetooth
®
device address.
The ‘# bytes’ column indicates how many bytes of data are required as arguments for the command.
Name
#
Comments
# bytes
Disconnect
00
Terminate the current connection.
0