User manual

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx
2011-04-27 Page 44 of 65
© 2011 The Code Corporation
• 14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065 • [phone] • FAX [phone]
Reg
Setting Name
Default (hex)
Comment
12c
Data Matrix Improvement
(dataMatrixMiscImprovemen
t)
0
Binary Dip Switch
Bit
Controls
Value
0 Binarization Improvement
0: Disable
1: Enable
1 Low Contrast Improvement
0: Disable
1: Enable
Improves the decoding capability of the Reader on low
contrast or pixilated Data Matrix bar codes
Note: Supported in firmware version 3280+
12d
Hong Kong 2 of 5
Symbology
0
Binary Dip Switch
Bit
Controls
Value
0 Hong Kong 2 of 5 Decoding
0: Disable
1: Enable
1 1 Digit Symbol Allowed
0: Disable
1: Enable
2 2 Digit Symbol Allowed
0: Disable
1: Enable
Note: Supported in firmware version 3280+
12f
Notify Of Packet Rejection
(notifyOfPacketRejection)
1
0: Disable
1: Beep 3 times
0x100xx: post event on No-Read , where the lower 8 bits
specify the event number. For example, 0x10009 to post
Event 0x09.
Specify the behavior when a packet is rejected because of
incorrect encryption key, incorrect packet protocol, or
CodeXML
®
Modem locked to a different Reader.
Note: Supported in firmware version 3280+
137
PDF417 Handle Invalid Shift
(pdfHandleInvalidShift)
0
0: Disable
1: Enable
Allows the decoding of PDF417 bar codes that were
improperly encoded
Note: Supported in firmware version 3280+