User manual

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx
2011-04-27 Page 32 of 65
© 2011 The Code Corporation
• 14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065 • [phone] • FAX [phone]
Reg
Setting Name
Default (hex)
Comment
4c
RSS Symbology (enableRss)
0
Binary Dip Switch
Bit
Controls
Value
0 RSS Expanded decoding
0: Disable
1: Enable
1 RSS Expanded Stacked decoding
0: Disable
1: Enable
2 RSS Limited decoding
0: Disable
1: Enable
3
RSS-14 and RSS-14 Truncated
decoding
0: Disable
1: Enable
4
RSS-14 Stacked and RSS-14
Stacked omni-directional decoding
0: Disable
1: Enable
4d
UPC Expansion
(enableUpcExpansion)
1
0: Disable
1: Enable
Also see registers: 4e, 6a, 74
4e
UPC Supplemental
(enableUpcSupplemental)
1
0: Disable
1: Enable
Also see registers: 4d, 6a, 74
4f
MSI Plessey Symbology
(enableMsip)
0
0: Disable
1: Enable
50
Aztec Symbology
(enableAztec)
0
Binary Dip Switch
Bit
Controls
Value
0 Aztec Decoding
0: Disable
1: Enable
1 Inverse Aztec Decoding
0: Disable
1: Enable
53
SXGA Near Field Window
Vertical Size (CR1200:
Horizontal)
(nearFieldDecodeWindowWi
dth_pixels)
CR2/CR3: 280
(#640)
CR1200: 500
(#1280)
Valid Range: 1 to 640 pixels
Decoding is attempted in only the specified window of the
full image.
Note: the width and height refer to the physical image, which
is rotated 90 degrees on CR2. This setting is applicable to
SXGA mode only.
54
SXGA Near Field Window
Horizontal Size (CR1200:
Vertical)
(nearFieldDecodeWindowHe
ight_pixels)
CR2/CR3: 400
(#1024)
CR1200: 280
(#640)
Valid Range: 1 to 400 (#1024) Pixels
Decoding is attempted in only the specified window of the
full image.
Note: the width and height refer to the physical image, which
is rotated 90 degrees on CR2. This setting is applicable to
SXGA mode only.