User manual

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx
2011-04-27 Page 31 of 65
© 2011 The Code Corporation
• 14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065 • [phone] • FAX [phone]
Reg
Setting Name
Default (hex)
Comment
47
MaxiCode Symbology
(enableMaxiCode)
0
Binary Dip Switch
Bit
Controls
Value
0 MaxiCode Decoding, Mode 0
0: Disable
1: Enable
1 MaxiCode Decoding, Mode 1
0: Disable
1: Enable
2 MaxiCode Decoding, Mode 2
0: Disable
1: Enable
3 MaxiCode Decoding, Mode 3
0: Disable
1: Enable
4 MaxiCode Decoding, Mode 4
0: Disable
1: Enable
5 MaxiCode Decoding, Mode 5
0: Disable
1: Enable
6 MaxiCode Decoding, Mode 6
0: Disable
1: Enable
48
Codabar Checksum
(miscBarcodeChecksum)
0
Binary Dip Switch
Bit
Controls
Value
0 Codabar Checksum Checking
0: Disable
1: Enable
1 Strip Checksum From Output
0: Disable
1: Enable
49
Code 39 Symbology
(code39FullAscii)
0
0: Disable
1: Enable
Code 39 Full ASCII Decoding
4a
Composite Codes
(enableCompositeCodes)
0
0: Disable
1: Enable
Composite Code Decoding
Also see register: d8
4b
Postal Code Symbology
(enablePostalCodes)
0
0: Disable
0x8: Australian Post decoding enabled
0x20000: Japan Post decoding enabled
0x200001: KIX decoding enabled
0x80: Planet decoding enabled
0x2000: Postnet decoding enabled
0x200000: Royal Mail decoding enabled
-0x80000000: USPS4CB (Firmware version 3418+)