User manual

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx
2011-04-27 Page 18 of 65
© 2011 The Code Corporation
• 14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065 • [phone] • FAX [phone]
0x17 Performance String D1
0x18 Performance String D2
0x19 Performance String D3
0x1a reserved
0x1b reserved
0x1c Performance String SB
0x1d Performance String SN
0x1e Performance String SF
0x1f Performance String VB (Obsolete)
0x20 Performance String VN (Obsolete)
0x21 Performance String VF (Obsolete)
0x22 Performance String AB (Obsolete)
0x23 Performance String AN (Obsolete)
0x24 Performance String AF (Obsolete)
0x25 – 0x47: for user applications
0x48 User defined “No Read” value (see register 55 in Section 8)
(The Reader will respond with d or e.)
Example –B-string setting SXGA Near Field Window:
B%0D%01X%1d%02P%54#1024%04
B-strings 0x0D through 0x24 are restored using J command as of version 2526.
Performance strings are included with app download and do not require a separate
download as of version 2526.
See “Appendix: B-string Settings” for complete details.
Note: Due to increased image capture speed. VGA support was removed in version
4508 (CR2/CR3) and 4180 (CR1200). VGA was never support in CR2500/3500.
Note: CR1200 supports B-strings beginning in version 4189.
G
Get setting from Reader; data contains a single character (0-255), which is the setting
number.
(The Reader will respond with d and the setting value as a sequence of 8 ASCII
hexadecimal digits or with e.)
Example - determine if Rectangular Data Matrix is enabled: G%16
Note: see Section 8 for possible Reader settings.
I
If data is blank the Reader to send its information string (no data). The Reader will
respond with i or e packet.
If data is No data, see ‘i’ response in section 5.