Technical data

MIQ/CR3; DIQ/CR3 Settings
4 - 29
ba76032e01 01/2012
4.6 Setting of current outputs
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-17 150 - Settings of outputs and links
1 Call up the measured value display with m.
2 Open the Settings menu with
s.
3 Highlight the Settings of outputs and links menu item with d
and confirm with
g. The Settings of outputs and links display
appears.
4 Highlight the Feature column with
d and confirm with g.
5 Highlight a line for a current output (Cx) in the Feature column
with
d and confirm with g.
The Settings of outputs and links display opens.
6 Highlight the Current output menu item with
d and confirm
with
g.
7 Select a function with d and confirm with g.