Technical data

Settings MIQ/CR3; DIQ/CR3
4 - 14
ba76032e01 01/2012
4.4 Deleting a link with an output
If a link from a current or relay output with a sensor is no longer
required, the link can be deleted.
The following steps describe operation with the 2020 XT system. With
the System 182 XT, the outputs of the DIQ/CR3 can be found directly
under the Settings menu (see system operating manual of the DIQ/
S 182 XT).
Fig. 4-14 150 - Settings of outputs and links:Erase link
1 Open the Settings menu with s.
2 Using
d and g, select and confirm the menu item, System
settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
3 Highlight the column & with d and confirm with g.
4 Highlight a linked output with
d and confirm with g.
5 Select Erase link with d and confirm with g.
A security prompt appears.
6 Select Erase link with
d and confirm with g.
The link is deleted.