Instruction manual

1-2 Error no. H0015 *
1Error list
H0015 * Error message Illeagal Version (file)
Cause Illeagal Version (file)
Measures Contact the maker.
L0016 * Error message Turn the power OFF and ON once
Cause The time from turning the power OFF to turning the power ON again is too short.
Measures Give more time before turning the power ON again after turning the power OFF.
C0018 Error message Illeagal Version (add memory)
Cause Version mismatch.
Measures The file has been automatically initialized.
H0020 * Error message System Error(same name is Backup data.)
Cause The same data name is already in use.
Measures Change the name.
H0021 * Error message System Error(Backup data is Count over.)
Cause The control region is overflowing.
Measures Change the software to increase the control region.
H0022 * Error message System Error(Backup data is no area.)
Cause The region is too small.
Measures Change the software to increase the region.
C0023 Error message Add memory was detached/attached
Cause Add memory was detached/attached.
Measures Please check wearing of an add memory.
H0025 * Error message Files will be saved to ROM
Cause Program, parameter and log files will be saved to ROM.
Measures Turn the power OFF and power ON once.
H0026 * Error message Files will be loaded from ROM
Cause Program, parameter and log files will be loaded from ROM.
Measures Turn the power OFF and power ON once.
H0027 * Error message Backup or restore is canceled
Cause Backup or restore is canceled.
Measures Turn the power OFF and power ON once.
L0030 Error message Hand error. LS release
Cause This is a user setting error.
Measures Reset the error after removing the cause.
L0031 Error message Air pressure error
Cause This is a user setting error.
Measures Reset the error after releasing the cause.
H0039 Error message Door Switch Signal line is faulty.
Cause The door switch open signal line is not stable.
Measures Turn the power OFF and ON once. When it comes back, contact to the dealer.
H0040 Error message Door Switch Signal is Input
Cause The door switch is open.
Measures Close the door connected to the input signal of door switch.
H0041 * Error message Comm. error (Remote I/O #1)
Cause An error was found in the communication line for remote I/O channel 1.
Measures Confirm the communication cable or connected device's power supply.
H0042 * Error message Comm. error (Remote I/O #2)
Cause An error was found in the communication line for remote I/O channel 2.
Measures Confirm the communication cable or connected device's power supply.
Error No. Error cause and measures