Remote Vehicle Control System PC 7400 TM Owner's Manual Keyless Entry & Remote Start System IMPORTANT NOTE: The operation of the Power Code as described in this manual is applicable to most vehicles. However, due to the engine type and configuration of some vehicles (i.e. diesel engines), some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
Table of Contents Features and Benefits of the PowerCode PC 7400TM ..................... 3 Using Your Remote Transmitter .............................................. 4 Locking the Vehicle Starter Disable Unlocking the Vehicle Two-Stage Door Unlock Activating the Trunk Release Feature Turning on the Vehicle Headlights Using the Car Finder Feature Personal Protection Alarm (Panic) Remote Start / Stop Feature Using Your Remote Starter ......................................................
Features and Benefits of the PowerCode PC 7400TM Two Easy-to-Use Weather-Resistant Remote Controls The remote controls included with the PowerCode PC 7400TM utilize durable, moisture resistant cases and sealed rubber buttons for reliability and long life. Rolling code technology prevents the transmitter signals from being duplicated. The button functions are clearly labeled to make the PowerCode PC 7400TM simple to operate.
Using Your Remote Transmitter Press to LOCK the Vehicle Doors* Press and hold to turn on headlights Press to UNLOCK Vehicle Doors Press for Car Finder Press and Hold for Panic Alarm Press and Hold to open trunk Press LOCK then Press START within 2 seconds for Remote Start/Stop Press for two-car operation (SHIFT) Press to turn on Rear Defroster* Locking the Vehicle Doors To lock the doors, exit the vehicle, close all doors, then press* the LOCK button.
Using Your Remote Transmitter (cont.) Two-Stage Door Unlock If this feature is enabled on your system, pressing UNLOCK one time will unlock only the driver’s door. Press UNLOCK again within 1 minute to unlock all doors. Activating the Trunk Release Feature Press and hold TRUNK to open the vehicle trunk or hatch (if equipped and connected). If this button is used to operate another accessory, the accessory will stay active for as long as the button is held.
Using Your Remote Starter Starting Your Vehicle The remote start function is activated by pressing LOCK and then pressing START within 2 seconds on the remote control. The system will check the vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds (diesel engines will take longer.) Press and hold START again to turn off the vehicle. If your vehicle stalls or does not start...
Using Your Remote Starter (cont’d) Using the “Quick-stop” Feature If you want to make a short stop and leave your vehicle running (to keep the interior warm or cool, for instance), the quick stop feature allows you to do this while keeping your vehicle secure and your keys with you. To engage quick stop: 1. Stop the vehicle and place the transmission in PARK. 2. With your foot off the brake pedal, press ARM, then press START within 2 seconds on the remote control.
Using Your Remote Starter (cont’d) Adding Remote Controls to Your System The PowerCodeTM has the ability to operate from up to four (4) remote controls. Follow these instructions to add a remote control to your system. 1. Make sure the system is unlocked and the ignition is off. 2. Open the driver’s door. 3. Turn vehicle ignition on. 4. Press and hold emergency override button. After 15 seconds, the horn will sound three (3) times.
Basic Troubleshooting This section outlines some of the basic issues you may experience while becoming used to the PowerCode PC 7400TM. If you have a problem that is not covered by this section, please consult your installer.
Emergency Disarm Procedure If your remote control is lost or fails to function, use this procedure to disarm the PowerCode PC 7400TM and start your vehicle. 1. Use the keys to enter the vehicle. 2. Insert the key into the ignition and turn to the ON position. 3. Locate and press the emergency override button. The Starter Disable will turn off and then you will be able to start your vehicle.
CODE Systems, INC. LIMITED LIFETIME WARRANTY 11 A CODE Systems INC. (“CODE”) vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the vehicle in which the security system was originally installed.
