Owner's Manual

CLBK
Door Lock Cable Bracket
Prior to mounting the actuator or cable bracket! determine the installation location keeping in mind that
in this application the actuator and actuator rod are best placed parallel to the factory locking cable.
Cable Clips
Mount the bracket to the vehicl:> door.
Vehicle Door
Lock Cable
~
Attach the vehicle's door lock cable to the
bracket
with the sLlpplied cable clips.
Carefully remove the cables sheathing
without damaging the steel cable itself.
Align the actuator rod
with the vehicle's door
lock cable and position the cable U::!ip.
Actuator
Rod
Cable U Clip
Attach the rod/cable connector and secure
with allen screws making sure the cable U clip
is in place to prevent damage to the cable.
Rod! Cable Connector
Technica! Support 800-225-6074
or go to http://techservices.audiovox.com