Installation guide

352014 Voxx Electronics Corporation. All rights reserved.
4 - Black/Yellow Output : Controls the BLACK/YELLOW output activation type and
timing.
Pulse During Crank - Output becomes active with the same timing as the
starter output wire, during crank only.
Ground While Running - Continuous output for the entire remote start
sequence until after the vehicle shuts down.
Ignition - Output becomes active with the same timing as the ignition output
and does not drop out during crank.
Accessory - Output becomes active with the same timing as the accessory
output, drops out during crank.
Transmitter Button Functions
1 Way
Transmitter
Lock Unlock
Car Find /
Panic
Start Operation Method
Lock X
Press and Release
Unlock X
Press and Release
2 Step UnlockX
Press and Release 2 times
Trunk X
Push and Hold (3 Sec)
Car FinderX
Press and Release
PanicX
Push and Hold (3 Sec)
Remote Start X
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shutdown
X
Push and Hold (3 Sec)
Run Time
Extention
X
Press and Release 4 times.
AUX 1XX
Push and Hold (3 Sec)
Shock Bypass XX
Press and Release Lock then
Press Lock + Car Find
Hidden AlarmX X
Press and Release Car Find then
Press Lock
Passive Arming
Bypass
XX
Press and Release
Turbo TimerXX
Press Unlock + Start
2 / 3 Hour StartX
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Daily Start Timer XX
Press Lock + Start
Temperature
Start
XX
Press Unlock + Start While Armed
Enter AUX Mode XX
Press and Hold Find + Start
Transmitter LED flashes 1 time
AUX 2X
Push and Hold (3 Sec)
AUX 3X
Push and Hold (3 Sec)
AUX 4X
Push and Hold (3 Sec)
AUX
5X
Push and Hold (3 Sec)
AUX 2, 3, 4, 5 - Access in AUX Mode