Installation guide

18 ca6554 Install revA

Negative Multiplexed Locks

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock

switch.

  Verication: This wire will show variable ground when the switch is activated.

 Pleaseconsultthewireandlocationchartforspecicresistorvaluesfor

your vehicle.

Connect the GREEN and BLUE or BLUE/GREEN wires shown in the diagram below

using (2) SPDT relays (not supplied).

Positive Multiplexed Locks

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock

switch.

  Verication: This wire will show variable positive voltage when the switch is

 activated.Pleaseconsultthewireandlocationchartforspecicresistor

values for your vehicle.

Connect the GREEN and BLUE or BLUE/GREEN wires shown in the diagram below

using (2) SPDT relays (not supplied).

Lock

Unlock

Vehicle Door Lock

Control Relays

GREEN ( - ) Lock Output

BLUE ( - ) Unlock Output

Multiplex Locks:

87a

Fused +12 Volt

Battery Source

Ground

Resistor