Owner's Manual

8
1
11
VIOLET/BLACK
AUX 1
This wire provides a
(-)
200mA output capable of driving relays. For Control
of
optional accessories (i.e. Power Window/Sunroof, etc.).
To
activate refer to the transmitter button configuration chart.
Please refer to the
selectable
options for timing.
3 Pin Parking Light Harness
BLACK GROUND
Connect the BLACK wire to a
solid chassis ground point using a ring terminal and
self
tapping screw (not supplied).
Scrape
away paint from the grounding point to
ensure a good connection. The recommended grounding point
is
a
metal
surface
in
the driver's side kick
panel
area.
NOTE:
Do not ground the BLACK wire with any other
vehicle
components.
2
WHITE/RED PARKING LIGHT INPUT
3
WHITE PARKING LIGHT
OUTPUT
Locate the parking light
output wire at the vehicle's light switch.
Verification:
This wire registers positive
voltage
when the parking lights
are
turned on.
Positive switching Parking Lights:
Connect the
WHITE/RED wire to a 15 Amp max fused battery source.
Connect the
WHITE wire to the parking
light
output wire.
Negative switching Parking Lights:
Connect the
WHITE/RED
wire
to a good chassis ground.
Connect the
WHITE
wire to the parking light output wire.
ca5554
Install
rev
A