Owner's Manual

6
3
GREEN
DOOR TRIGGER INPUT
(
- )
Locate the vehicle's dome light or door pin switch wire.
Verification:
This wire
will
register ground (NEG) when the door is opened
and the interior light is on. This wire
will
register positive voltage when the
door
is
closed and the interior light
is
off.
Connect the GREEN wire to the vehicle's negative door input wire(s).
NOTE:
Certain vehicles may require multiple connections. Refer to vehicle
application guide.
4
BLACK/WHITE
ILLUMINATED
ENTRY OUTPUT
(-)
This wire provides a ( - )
200mA
output for 30
seconds when the system is disarmed
capable
of
driving relays.
Locate the vehicle's dome light or pin switch wire.
5
Verification:
This wire
will
register positive voltage or ground when the
vehicle's dome light is turned
ON.
BROWN/BLACK
HORN
OUTPUT (
- )
Locate the vehicle's horn wire.
Verification:
This wire
will
register at positive voltage and register
ground when the horn switch is pressed.
Connect the BROWN/BLACK wire to the vehicle's horn wire. This is a
low
current
output,
200mA.
6
RED/WHITE
TRUNK
RELEASE
OUTPUT (
- )
Locate the vehicle's trunk release wire at the trunk release switch.
Verification:
This wire
will
register either positive voltage
or
ground when
the trunk release
is
activated.
This
is
a low current output,
200mA
and is configurable
in
option programming.
ca5554
Install rev A