Owner's Manual

Replacing Remote Control Batteries
1 Way
4 Button Remote Control- Model CAT4
The batteries inside each remote
control should last approximately
1 year under
normal
use. When the batteries become weak you
will
notice the remote
control range (the
distance from the
vehicle
the remote
control will
work) deteriorate
and
the
small
LED
on
the remote control will
dim.
To
replace
the remote control batteries:
1.
Using a coin, disassemble
the halves
of the remote
control.
2.
Remove the
old
battery, observing
the+/-
symbols
on
the
batteries
and
replace
with a new battery.
3.
Reassemble
the halves
of the remote
control
4.
Test operation of the remote control.
2 Way
LCD Remote Control- Model CATLCD
The AAA battery inside the 2-way
LCD
remote control should last approximately
6
months under
normal
use. When the battery becomes weak you
will notice the remote
control range (the distance from the
vehicle
the remote control will work) deteriorate and
the BATTERY icon
on
the
LCD remote control will
show 1 bar or
less.
1.
Gently slide the battery cover off of the remote
control.
2.
Remove the
old
AAA battery, observing
the+/-
symbols
on
the
battery,
and
replace
with a new AAA battery.
3.
Gently slide the battery cover
on
to the back
of
the remote
control.
4.
Test operation of the remote control.
2014
Voxx Electronics Corporation.
All
rights reserved. 13