Owner's Manual

Additional 2-Way LCD Remote Control Functions
Check Vehicle Status
Press and
release
l:F
2 times then press
@
within 3 seconds, the transmitter
will
display the current status of the
vehicle.
Display
Illumination
Press and
hold
the
l:F
button for 1 second. The
display will illuminate
for 5 seconds.
Melody
I
Vibration Mode
To
have the remote control vibrate,
play
a
melody
tone or both each time it receives a
response from the
vehicle press and
release
l:F
then press and
hold
63
for 2
seconds.
Button
Beeps
To
toggle
button beeps
on
or off press and release
l:F
then press and hold 0
for 2
seconds.
Battery
Save
Mode
While
in
POWER
SAVE MODE the 2-way LCD
transmitter will NOT look for any
incoming signals from the main unit
until
a button is pressed. The
LCD
screen will
display
SAVE
to indicate that power save mode is
ON.
To
enter power save mode
press and
hold
l:F
for 5 seconds.
Clear
Flashing
Icons
and
Melody
Sound
Press the
l:F
button 3 times within 3 seconds. This will clear
the
melody
sound and
flashing icons on the
LCD
screen.
Button
Lock
Press and
release
l:F
then press
hold
the
@
for 2 seconds to
toggle
the button
lock
on or off. When the button
lock
is active, the remote
control will
beep/vibrate 2 times
when a button is pressed indicating it
is
locked.
Illumination
Press and
release
l:F
2 times then press and
hold
@
for 2 seconds to
toggle
illumination
on
or off. When on, the
display will illuminate when it receives or sends a
command.
2014 Voxx Electronics Corporation.
All
rights reserved.
9