Owner's Manual

User Programmable Run Time I
Run Time Extension
The system has the ability
to
allow
the user to extend the time the
vehicle will
be
running under
control
of the remote start. This
will only extend the
run
time back to the
current run time setting during the current remote start
cycle. If
your system
is
set to
run 15 minutes and the time remaining
is
4 minutes, extending the
run
time
will
reset
the countdown timer to 15 minutes and your vehicle will
continue to
run
for another
15
minutes.
Follow
the steps below
to
extend the
vehicle's run time.
1.
The remote start must
already
be
active.
2.
Press and release
the
0
button 4 times.
3.
The system
will
chirp 1 time and
flash
the parking
lights
4 times to
confirm that the
run
time has been reset.
Using the
~~Quick-stop"
Feature-
Automatic Transmission Vehicles
If
you want to make a short stop and keep your
vehicle running (to keep the interior
warm or
cool),
the quick-stop
feature
allows you to do this
while
keeping your vehicle
secure and your keys with you.
To
engage quick stop:
1.
Stop
the
vehicle and
place
the transmission
in
PARK.
2.
With your foot off the brake pedal,
press and
release
the
0
button 2
times within 2 seconds. The LED
will flash
3 times to confirm quick
stop
is
entered.
3.
Remove the keys from the ignition and exit the
vehicle. Press the
(2)
button to
lock
the
vehicle's
doors if desired.
Note:
Do not
leave children
or
animals
unattended
in
the vehicle
when using the
quick-stop feature.
Operating the Daily
Start Timer
The system has the
ability
to start your
vehicle
based
on
a 24-hour countdown timer.
This feature requires a two-part activation sequence. From the remote,
while
in
range
of the
vehicle,
pressing both the
@
&
0
buttons together
will
activate the 24 hour
countdown timer (the
vehicle will
start
24
hours from this time). Next, When you are
finished operating the vehicle
for the
day,
perform the
following
steps
to
complete
the
process.
1.
Turn the ignition
ON/OFF (vehicle must be disarmed).
2.
Within 10 seconds,
while
pressing the brake, press and
release the
0
button twice.
3.
The vehicle will
emit 2 chirps and
flash
the parking
lights
4 times.
2014
Voxx Electronics Corporation.
All rights reserved.
7