Owner's Manual

6
Remote Starting Your Vehicle
To
activate the remote start function, press and
release the
0 button 2 times within 2
seconds. The system
will
sound, the parking lights will flash 1 time and the system
will
check the
vehicle
to ensure it is safe to start.
If all
safety parameters are correct,
the
vehicle will
start within 5 seconds. The
vehicle's
parking lights will
turn on (or flash
depending on system settings) as a
visual
indication that the
vehicle
has started and is
running.
If
your vehicle stalls
or does not start, the system
will
pause 5 seconds, then try
2 more times to start
the
vehicle
(a
total
of
3 attempts). The system
will
pause
5 seconds between each start attempt.
If
the
vehicle
does not start after the 3rd
attempt, the system
will abort the remote
vehicle
start process.
Note:
Do not
leave children or
animals unattended
in
the vehicle
when using the
remote start feature.
Note:
Manual
transmission vehicles
- Remote Start Ready Mode must be set.
Remote
Start
Shutdown
Press and
hold
the
0
button for 3 seconds to turn the
vehicle
off.
Entering the Vehicle while
it
is
Running
via Remote Vehicle
Start
1.
Unlock
the
vehicle's
doors.
2.
Enter the vehicle.
DO
NOT PRESS
THE BRAKE PEDAL!
3.
Insert the key into the ignition switch and turn to the
ON
or RUN
position.
4.
Press the brake
pedal. The remote
vehicle
starter
will
disengage and
the
vehicle will
operate
normally.
Preheating
or
Precooling the Vehicle's
interior
Before exiting the
vehicle,
set the temperature
controls
to
the desired setting and
operation. After the system starts the
vehicle,
the heater or air conditioner
will
activate
and heat or cool
the
vehicle's
interior to your setting.
ca5554 Owners rev A