Owner's Manual

Using
Your
Remote Starter
Remote
Start
Ready Mode
must
be enabled
if
your
vehicle
is
equipped
with a
manual
transmission.
Remote
Start
Ready Mode - Manual Transmission Vehicles
Only
To
activate the remote start function, the system must first be
in
Remote
Start
Ready
Mode. Follow the steps below to enter remote start ready mode.
1.
While
the engine is running by the ignition key;
a.
Set
the parking brake
b.
Place
the transmission
in
neutral.
2.
With your foot off the brake
pedal,
press and
release the
0
button 2
times within 2 seconds. The LED will flash 3 times and the parking
lights
will turn on to confirm the system
has entered quick stop mode.
3.
Remove the keys from the ignition, the
vehicle
will remain running
in
quick stop mode.
4.
Exit the
vehicle
and close
all
vehicle
doors.
5.
Within 1 minute
of
step 1 , press the
@
button to lock
the
vehicle's
doors. The
vehicle will shutdown and sound 2 short chirps then 1
long
chirp to confirm ready mode
is
set.
Cancelling Remote
Start
Ready Mode
The system will exit remote start ready mode if any
of
the
following
occur:
Open any door
Open
the hood or trunk (if connected)
Press the brake
Release
the parking brake
Turn the ignition ON
2014
Voxx Electronics Corporation.
All
rights reserved.
5