Owner's Manual

Programmed Transmitter Notification
As a security precaution each time the
vehicle's
ignition
is
turn
on
the status LED
light
with flash
the number of transmitters programmed into the system. This
helps
to
identify unauthorized transmitters from accessing your vehicle. If
you
believe
an
unauthorized transmitter has been programmed
to
your system, contact your
installing
dealer for
assistance.
Valet Mode
Valet
Mode
is
used
to
disable the system from remote starting.
To
enter or exit
valet
mode
simply follow
the 4 steps
outlined below:
1.
Turn the vehicle's
ignition
ON.
2.
Push and hold
the programming/valet button.
3.
The
LED
will
turn
on
solid when
valet
mode
is
active
4.
Release
the programming/valet button.
Eliminating Lock
I Unlock Notification Chirps
System
lock
and
unlock
notification chirps can
be
toggled
ON
or OFF
without
entering the programming feature banks.
1.
Turn the ignition
ON
then
OFF.
2.
Press and
release the valet/programming button 3 times. The system
will
respond with 1
chirp for
ON
or 2 chirps for
OFF.
4 ca5554
Owners rev A