Owner's Manual

26
15 -Accessory Output:
Programmable high current output.
Accessory -
Output
becomes active with the same timing as the accessory
output,
drops
out during crank.
Ignition-
Output
becomes active with the same timing
as
the ignition output
and
does
not drop out during crank.
Start
I
Crank-
Output
becomes active with the
same
timing as the starter
output wire, during crank
only.
16-
Pulse Additional
Outputs
w/
Unlock:
When the
Unlock
button is pressed on
the remote transmitter the system
will also simultaneously pulse additional
outputs.
Ignition,
Accessory
& Ground
While
Running outputs for 1 second. The 3rd setting
also activates the pulse
after shutdown output to turn off the RAP on certain vehicles
OFF-
When
Unlock is pressed no
additional
outputs are activated.
IGN, ACCY,
GWR-
When the
Unlock
button is pressed the system will also
simultaneously pulse
the
Ignition, Accessory & Ground
while
Running outputs
for 1 second.
IGN, ACCY,
GWR, then
Pulse
After Shutdown - When the Unlock
button is
pressed the
system
will also simultaneously pulse
the
Ignition,
Accessory &
Ground
while
Running outputs for 1 second then waits 2 seconds then pulses
the green/white
pulse
after shutdown wire for 1 second.
17 - Door Lock
Control
During Remote Start:
Controls
the systems
door
lock
outputs during
the
remote start sequence.
OFF-
The
system
will not
lock
or
unlock
the vehicle.
Unlock
before Start, Lock After Start -
Unlock Pulse before remote start
sequence begins, Lock
pulse
after remote start sequence
is
complete and
engine is running.
Unlock
Before Start - Unlock Pulse
before remote start sequence begins.
Lock
After
Start - Lock pulse
after remote start sequence is
complete
and
engine is running.
Lock
After
Shutdown-
Lock pulse
after remote start shutdown sequence is
complete
ca5554
Install
rev A