Owner's Manual

8 - Gas
I
Diesel: Selects
engine type and delay time for the starter output wire during
remote start activation.
Gas-
Gasoline engine,
no
delay for the starter output wire.
1 0 Second
Delay - Diesel engine, delays the starter output wire for 1 0
seconds after the ignition has been powered up by the remote start.
15 Second
Delay-
Diesel engine, delays the starter output wire for 15
seconds after the ignition has been powered up by the remote start.
20
Second Delay - Diesel
engine, delays the starter output wire for
20
seconds after the ignition has been powered up by the remote start.
45
Second
Delay - Diesel
engine, delays the starter output wire for 45
seconds after the ignition has been powered up by the remote start.
9 -
Single
I
Double Pulse Start:
Switches the remote start activation between a
single or double press from the transmitter.
10
-
IGN
2 Output:
Programmable high current output.
Ignition
2 - Ignition output during remote start.
Accessory-
Accessory output during remote start.
Start
I
Crank - Crank output during remote start.
11
- 2 or 3 Hour Start:
Not available
on
this model.
12-
Turbo Timer:
Not available on this model.
13 - Transmission Mode:
Select
the type of remote start activation based on
the
vehicle's
transmission type.
Automatic - For use with automatic transmission vehicles. Standard remote
start operation.
Manual - For use with manual transmission vehicles. Remote start ready mode
must be set upon exit
of
vehicle to enable remote start.
14-
Temperature
Start:
Sets
the threshold temperature
for temperature start mode.
When temperature start
is
activated, the remote start function will
activate when the
ambient temperature drops below the selected temperature.
2014 Voxx
Electronics
Corporation.
All
rights reserved.
25