Owner's Manual

16
Set
Up & Programming
Transmitter Programming - Feature Bank 1
1.
Turn the ignition ON.
2.
Press and hold
the valet/override
button.
3.
Within
10
seconds the system will
chirp (3) three times.
4.
Press 1 button of each transmitter you wish to program.
5.
The system
will
respond with 1 chirp for each accepted transmitter.
6.
Pressing the override button at anytime during programming
will
advance to
the next bank.
NOTE:
The system
will exit transmitter programming
after 15 seconds of inactivity.
NOTE:
This system has 1 button programming which programs
all channels
of
the
system.
NOTE:
The system will hold
up
to 4 transmitters
in
memory, programming a 5th
transmitter
will erase the
oldest
transmitter
in
memory.
NOTE:
This system has
PTN-
Programmed Transmitter Notification. Each time the
ignition is turned
ON,
the LED will flash the number of transmitters programmed to the
system.
Manual
Feature Programming - Feature Bank 2
- 5
1.
Turn the ignition
ON.
2.
Press and
hold
the valet/override
button.
3.
Within
10
seconds the system will
chirp (3) three times.
4.
Use the valet/override
button to advance through each option bank. For
feature programming advance
to
Feature Bank
2,
3,
4 or
5,
which
is
(4)
four, (5) five, (6) six and (7) seven chirps.
5.
Use the transmitter
0
button to scroll
through the
selections
in
each feature
bank, the system will chirp to match the feature number.
6.
Press the transmitter
@
button to change the desired feature. The LED
will
flash indicating the changed feature.
Defaulting All
Features:
Pressing the
riJ
button anytime while
in
any of the feature
banks
will default all features and return
you
to feature bank 2 - 4 chirps.
NOTE:
The system will
remain
in
feature programming mode
as
long
as
the ignition
is
on, there
is
no
time
limit.
To
exit programming turn the
IGNITION
OFF.
ca5554 Install
rev A