Owner's Manual

Reverse Polarity Locks (5-Wire Door locks)
All Door Lock and Unlock: Locate the lock
I
unlock wire at the vehicle's
lock
I
unlock
switch.
Verification:
These wires
will
rest at ground and register positive
voltage when the Lock and Unlock
switches are activated.
Connect
the
GREEN and BLUE or BLUE/GREEN wires shown
in
the diagram below
using (2) SPOT relays (not supplied).
Reverse Polarity Locks:
GREEN ( - ) Lock
Output
Cut
Negative Multiplexed Locks
All Door Lock and Unlock: Locate the lock
I
unlock wire at the vehicle's
lock
I
unlock
switch.
Verification:
This wire
will
show variable ground when the switch is activated.
Please consult the wire and location chart
for specific resistor values for
your
vehicle.
Connect
the
GREEN and BLUE or BLUE/GREEN wires shown in the diagram below
using (2) SPOT relays (not supplied).
Multiplex
Locks:
BLUE ( - )
Unlock Output
2014
Voxx
Electronics
Corporation_ All
rights reserved.
13