Installation guide

6
3
GREEN
DOOR TRIGGER INPUT
(-
)
Locate the vehicle's
dome
light or door pin switch wire.
Verification:
This wire
will
register ground (NEG) when the door is opened
and the interior light
is on. This wire
will
register positive
voltage
when the
door is
closed and the interior
light is off.
Connect the GREEN wire to the
vehicle's
negative door input wire(s).
NOTE:
Certain
vehicles
may require
multiple
connections. Refer to
vehicle
application
guide.
4
BLACK/WHITE
ILLUMINATED ENTRY OUTPUT
(-)
This wire provides a ( - ) 500mA output for 30 seconds when the system is
disarmed
capable of driving relays.
Locate the
vehicle's dome
light
or pin switch wire.
5
Verification:
This wire
will register positive voltage
or ground when the
vehicle's dome
light
is turned
ON.
BROWN/BLACK
HORN
OUTPUT ( - )
Locate the vehicle's
horn wire.
Verification:
This wire
will
register at positive
voltage
and register
ground when the horn switch is pressed.
Connect the BROWN/BLACK wire to the
vehicle's
horn wire. This is a
low
current
output,
SOOmA.
6
RED/WHITE
TRUNK RELEASE OUTPUT ( - )
Locate the vehicle's trunk release wire at the trunk
release
switch.
Verification:
This wire will
register either positive
voltage
or ground when
the trunk
release is activated.
This is a
low current output, 500mA and is
configurable in option programming.
ca5153
I
5153sst rev A