Installation guide

z~
-u
o...o
N_.J
1
4 Pin Alternate Harness
BLACK/YELLOW
PULSE
DURING
CRANK
(-)
GREEN/WHITE
PULSE AFTER
SHUIDOWN
(-)
LT BLUE
FACTORY ARM
I
PULSE AFTER START ( - )
L T GREEN/BLACK FACTORY
DISARM
I
PULSE BEFORE START ( - )
2 Pin Door Lock Harness
BLUE
UNLOCK
(-)
GREEN
LOCK
(-)
11
Pin Main Harness
GRAY/RED
PARKING
BRAKE
INPUT
(-)
Locate the vehicle's parking brake wire.
Verification:
This wire
will
register ground when the vehicle's
PARKING
BRAKE is engaged.
NOTE:
The
following
connection is required for
Manual
Transmission
Mode.
2
PURPLE
DOOR TRIGGER INPUT
(
+)
Locate the vehicle's dome light or door pin switch wire.
Verification:
This wire will
register positive voltage
(POS)
when the door is
opened and the interior light is on. This wire
will
register ground or "0"
Volts when the door
is
closed and the interior light is
off.
Connect the PURPLE wire to the vehicle's positive door input wire(s).
NOTE:
Certain vehicles may require multiple connections. Refer to vehicle
application guide.
2012 Audiovox Electronics Corporation. All rights reserved.
5