Installation guide

Using
the
"Quick-stop"
Feature
-
Automatic
Transmission
Vehicles
If
you want to make a short stop and keep your vehicle running (to keep the
interior warm or cool), the quick-stop feature
allows you to do this while keeping
your
vehicle secure and your keys with you.
To
engage
quick
stop:
1.
Stop the vehicle and
place the transmission
in
PARK.
2.
With your foot off the brake pedal, press and
release the
0
button 2
times within 2 seconds. The LED
will
flash 3 times to confirm quick
stop is entered.
3.
Remove the keys from the ignition and exit the vehicle. Press the
@ button to lock
the vehicle's doors if desired.
Note: Do not leave children or animals unattended
in
the
vehicle
when using the
quick-stop feature.
Operating
the
Daily
Start
Timer
The system has the ability
to start your vehicle based on a 24-hour countdown
timer. This feature requires a two-part activation sequence. From the remote,
pressing both the
@
&
0
buttons together
will
activate the 24 hour countdown
timer (the vehicle
will
start 24 hours from this time). Next, When you are finished
operating the vehicle
for the day, perform the following
steps to complete the
process.
1.
Turn the ignition
ON/OFF (vehicle must be disarmed).
2.
Within 1 0 seconds,
while pressing the brake, press and
release
the
0
button twice.
3.
The
vehicle will
emit 2 chirps and flash
the parking lights 4 times.
Remote
Start
Safety
Features
For safety and security reasons, the system
will
shutdown or prevent the remote
vehicle
starter from activating if any of the following
occur:
1.
The
vehicle
hood is open.
2.
The brake
pedal
is pressed prior to turning the
ignition key to the
ON
position.
3.
The engine is over-revved (tach checking only).
4.
Valet
mode is active.
2012
Audiovox
Electronics
Corporation. All
rights reserved.
7