Installation guide
4
Programmed
Transmitter
Notification
As a security precaution each time the
vehicle's
ignition is turn
on
the status LED
light
with flash
the number of transmitters programmed into the system. This
helps
to identify unauthorized transmitters from accessing your vehicle. If
you
believe
an
unauthorized transmitter has been programmed to your system, contact your
installing dealer
for assistance.
Valet Mode
Valet
Mode
is
used to
disable
the system from remote starting.
To
enter or exit
valet
mode
simply follow
the 4 steps
outlined below:
1.
Turn the
vehicle's
ignition
ON.
2.
Push and
hold
the programming/valet button.
3.
The LED will
turn
on
solid
when
valet
mode
is
active
4.
Release
the programming/valet button.
Eliminating
Lock
I
Unlock Notification Chirps
System
lock
and
unlock
notification chirps can be toggled
ON
or
OFF
without
entering the programming feature banks.
1.
Turn the ignition
ON
then
OFF.
2.
Press and
release
the valet/programming button 3 times. The system
will
respond with 1 chirp
for
ON
or 2 chirps for
OFF.
ca5153/5153sst rev A