Installation guide

2 -
Factory
Disarm: Controls
the timing of the
LT.
GREEN/BLACK factory disarm
output.
Factory Disarm -
Single
1 second pulse
with unlock
and remote start
activation.
2nd
Unlock-
Same output as
unlock
with 2nd press of
unlock.
Start Status -
Single
1 second
pulse
with unlock
and continuous (
- ) output
during the remote start
cycle.
NOTE: On
this
model
the Lt Green
I Black Output
wire can be configured
in
Bank
3 or Bank
5.
Any changes to this feature
in
Bank 5
will
override changes made
in
Bank
3.
3 -
Ignition
Controlled
Locks:
Control
of door
locks
when the ignition is
cycled
ON
or
OFF.
OFF
- Door
locks
not activated by ignition.
Lock and
Unlock-
Doors lock
when ignition is turned on and unlock
when
ignition is turned off.
Lock
Only
- Doors
lock
when ignition is turned on
only.
Unlock Only
Doors unlock when ignition is turned off only.
4 -
Trunk
Output
Timing
- Red/White
Output:
Controls the output timing/type
of the
RED/WHITE output.
1 Second
Pulse -
1 second
pulse
output.
1
0 Second - Continuous output for 1
0
seconds.
20
Seconds - Continuous output for
20
seconds.
Latched until IGN ON
- Continuous output until
the
vehicle's
ignition is turned
ON.
Latched ON until Button Press - Continuous output
until the activation button
is pressed again.
5 -
Horn
Output
Timing:
Control
the minimum horn
pulse
time
in
milli
seconds,
some
vehicle will require a
longer pulse
to activate the factory horn.
16mS 1
OmS
30mS 40mS 50mS
6 -
Real Panic:
Controls
the panic out when triggered from the transmitter.
ON
- Randomized horn honks when panic is triggered.
OFF
- Standard pattern horn honks when panic is triggered.
2012 Audiovox
Electronics
Corporation.
All
rights reseNed. 21