Installation guide
14
Positive
Multiplexed Locks
All Door Lock and Unlock: Locate the lock
I
unlock wire at the vehicle's lock
I
unlock switch.
Verification:
This wire will show variable positive voltage when the switch is
activated. Please consult the wire and location chart for specific resistor
values for your vehicle.
Connect the GREEN and BLUE or BLUE/GREEN wires shown
in
the diagram
below using (2) SPOT relays (not supplied).
Multiplex Locks:
Adding Aftermarket Actuators
Vehicle Door Lock
Control Relays
After
installing
aftermarket actuators, (not supplied). Connect the GREEN and
BLUE wires shown
in
the diagram below using (2)
SPOT
relays (not supplied).
-------f
Fused +12 Volt
87
Battery Source
,.----t-----1
Fused
+
12 Volt
Battery Source
BLUE (-) Unlock
Output
ca5153
I
5153sst rev A