Technical data

-7-
Design
The type label shows the transmitter type. The sensor enclosure includes the sensor and the sensor
card, which carries the components for the sensor circuitry. For adjustment of electrical zeropoint and
sensitivity you can use either the built-in display or the remote control RC2. A secured key at the left
side of the transmitter allows a quick zero setting. The electronics on the main p.c.board converts the
sensor signal into a linear output signal of 4 .. 20 mA.
CC28 D
Cable gland
Detection range
Display
Touch keys
Type label with date of production
e.g. SN:0504xxxx (05=year, 04=month)
Status display
Buzzer
(only for CC28 DA)
Sensor casing
Potential equalization
A
larm LEDs
Key for quick adjustment
(AutoZero key)
behind lock screw
Connection fo
r
Remote Control
CC28 DA
green yellow
Operation Fault