Owner's Manual

4
PURPLE
DOOR
TRIGGER INPUT
(
+ )
Locate the
vehicle's
dome
light
or
door
pin switch wire.
Verification:
This wire
will register positive
voltage (POS)
when
the
door
is
opened and the interior light
is
on. This wire
will
register ground
or
"0" Volts when the door is
closed
and the interior
light
is
off.
Connect the PURPLE wire to the
vehicle's
positive
door
input wire(s).
NOTE:
Certain vehicles
may
require
multiple
connections. Refer
to
vehicle
application
guide
5
YELLOW
IGNITION INPUT
(
+ )
Locate the
vehicle's
ignition wire
at
the ignition switch.
Verification:
This wire registers
voltage
when the key is turned to the
ON
(or
RUN) position. The
voltage
does
not drop
out
when the key is turned
to
the
START
(or CRANK) position.
Connect the
YELLOW
wire to the vehicle's Ignition wire.
6
RED/WHITE
TRUNK
RELEASE
OUTPUT
( - )
Locate the vehicle's
trunk
release
wire
at
the trunk
release
switch.
Verification:
This wire
will register either positive
voltage
or
ground
when
the trunk release is activated.
This is a
low
current output, 200mA.
7
BROWN/BLACK
HORN
OUTPUT
( - )
Locate the
vehicle's horn wire.
Verification:
This wire
will register
at
positive
voltage
and register
ground when the
hom
switch is pressed.
Connect the
BROWN/BLACK
wire
to
the vehicle's
horn wire. This is
a
low
current
output,
200mA.
2014
Voxx
Electronics Corporation.
All
rights reserved.
7