Owner's Manual

6
5
RED
BATIERY
12V (
+)
Locate 1
of
the vehicle's constant 12 Volt battery wires at the ignition switch.
Verification:
This wire
will
register
(+)voltage
in
all positions
of
the ignition
switch.
Connect the RED wire to the constant 12 Volt battery wire.
NOTE:
Remove
all
fuses until
all
connections are made.
1
BLUE/WHITE
INSTANT TRIGGER INPUT
(
- )
This wire is a GROUND
input for an external sensor or secondary pin switch.
Verification:
This wire when connected
will
trigger the security system.
2
GREEN
DOOR TRIGGER INPUT
(
- )
Locate the vehicle's dome light
or
door pin switch wire.
Verification:
This wire
will
register ground (NEG) when the door is opened
and the interior light is on. This wire
will
register positive voltage when the
door is closed and the interior light is off.
Connect the GREEN wire to the vehicle's negative door input wire(s).
NOTE:
Certain
vehicles
may require multiple connections. Refer to
vehicle
application guide
3
ORANGE
GROUND
WHEN ARMED
OUTPUT
(
- )
This wire
will
have a continuous (
- )
SOOmA
output when the system is Armed. This
wire is
typically
used for controlling window modules
or
additional sensors.
This output is configurable in option programming.
ca1554 revA