Owner's Manual

Transmitter Programming - Feature
Bank
1
1.
Turn the ignition
ON.
2.
Press
and
hold
the
valet/override
button.
3.
Within
10
seconds the system
will
chirp (3) three times.
4.
Press 1 button of each transmitter you wish to program.
5.
The system
will
respond with 1 chirp for each accepted transmitter.
6.
Pressing the override button at anytime during programming
will advance to
the next bank.
NOTE: The system will
exit transmitter programming after 15 seconds of inactivity.
NOTE: This system has 1 button programming which programs all channels
of the
system.
NOTE: The system
will hold
up
to 4 transmitters
in
memory, programming a
5th
transmitter will
erase the
oldest
transmitter
in
memory.
NOTE: This system has
PTN-
Programmed Transmitter Notification. Each time the
ignition is turned
ON,
the LED
will
flash the number of transmitters programmed to the
system.
Transmitter programming
for
2
Car
Mode *2
way
transmitter
only:
1.
Enter the transmitter into 2 Car
Mode. (Refer to transmitter operation in
the owners
manual
for 2 car operation)
2.
Follow
the steps above for transmitter
programming.
NOTE: 2 car mode requires
an
additional security system
installed
in
a second
vehicle.
Manual
Feature Programming - Feature Bank 2
&
3
1.
Turn the ignition
ON.
2.
Press and
hold
the
valet/override button.
3.
Within
10
seconds the system
will
chirp (3) three times.
4.
Use the
valet/override button to advance through each option bank. For
feature programming advance to Feature Bank
2 or
3,
which
is
(4) four
and
(5) five chirps.
5.
Use the transmitter
U
button to
scroll
through the
selections
in
each
feature bank, the system will
chirp to match the feature number.
6.
Press the transmitter
@
button to change the desired feature. The
LED
will
flash indicating the changed feature.
2014
Voxx
Electronics Corporation.
All
rights reserved.
15