Owner's Manual
Table Of Contents
- Owner's Guide
- Installation and Reference Guide
- Table of Contents
- Before You Begin
- Wire Connection Guide
- Additional Ports
- Set Up & Programming
- Transmitter Programming - Feature Bank 1
- Manual Feature Programming - Feature Bank 2 & 3
- Manual Feature Programming - Feature Bank 4 & 5 - N/A
- Shock Sensor Programming, Adjustment and Testing - Feature Bank 6
- Code Alarm Utility App Feature Programming / Firmware Updates (optional)
- Dome Light Delay / Theater Dimming
- Chirp Delete - User Accessible
- User Selectable LED
- Feature Descriptions
- Transmitter Button Functions
- Security Trigger Zones
19
2019 Voxx Electronics Corporation. All rights reserved.
Code Alarm Utility App
Feature Programming / Firmware Updates (optional)
The new Code Alarm Utility App is able to set feature options, save frequently used
featurecongurationsaswellasupdatemodulermware.
PC System Requirements:
Windows XP SP3 or above
Min 1GB RAM
Net Framework 4.0 or above
Screen Resolution - Suggested 1280x1024 or above
Required Accessory & PC Software:
VEPROG Programmer Accessory
CA Utility App
VEPROG drivers
Download and Install the Required Drivers:
1. To download the Code Alarm Utility App visit the Voxx University website at
voxxuniversity.com (registration/login required).
2. Select VOXXTECH and locate the utility app under the heading Software
Downloads.
3. The Code Alarm Utility App download includes both the CA Utility app and
necessary VEPROG drivers.
4. Install both items before attempting to update modules.
Use a PC and VEPROG tool for Feature Programming or Firmware Updates:
1. Launch the Code Alarm Utility App.
2. Connect the VEPROG to your PC via the USB port.
3. Connect the VEPROG to the Code Alarm Module.
4. Selectthefeaturesyouwishtochangeorupdatermwareifneeded.