Owner's Manual
Table Of Contents
- Owner's Guide
- Installation and Reference Guide
- Table of Contents
- Before You Begin
- Wire Connection Guide
- Additional Ports
- Set Up & Programming
- Transmitter Programming - Feature Bank 1
- Manual Feature Programming - Feature Bank 2 & 3
- Manual Feature Programming - Feature Bank 4 & 5 - N/A
- Shock Sensor Programming, Adjustment and Testing - Feature Bank 6
- Code Alarm Utility App Feature Programming / Firmware Updates (optional)
- Dome Light Delay / Theater Dimming
- Chirp Delete - User Accessible
- User Selectable LED
- Feature Descriptions
- Transmitter Button Functions
- Security Trigger Zones
14
ca1155E rev B.
Digital Tilt / Shock Sensor
The systems digital tilt and shock sensor is onboard and part of the main module.
Mountthemoduletoarmwireharness,orotherstablelocation,thatwillalowthe
sensor to pick up vibrations due to impact to the vehicle or if the vehicle is lifted /
tilted.
When the security system is armed a light impact to the vehicle will trigger the
system’s warn-away feature chirping the horn/siren several short times, a harder
impact will trigger the system’s full-trigger mode.
To adjust the shock sensor, refer to Shock SensorProgramming, Adjustment and
Testing.
To adjust the tilt sensor, refer to Digital Tilt Setting in option programming.
NOTE: During remote start, the system will ignore the sensor upon ignition until after
remote start shutdown.