Owner's Manual
Table Of Contents
- Owner's Guide
- Installation and Reference Guide
- Table of Contents
- Before You Begin
- Wire Connection Guide
- Additional Ports
- Set Up & Programming
- Transmitter Programming - Feature Bank 1
- Manual Feature Programming - Feature Bank 2 & 3
- Manual Feature Programming - Feature Bank 4 & 5 - N/A
- Shock Sensor Programming, Adjustment and Testing - Feature Bank 6
- Code Alarm Utility App Feature Programming / Firmware Updates (optional)
- Dome Light Delay / Theater Dimming
- Chirp Delete - User Accessible
- User Selectable LED
- Feature Descriptions
- Transmitter Button Functions
- Security Trigger Zones
7
2019 Voxx Electronics Corporation. All rights reserved.
8 WHITE PARKING LIGHT OUTPUT
9 WHITE/RED PARKING LIGHT INPUT
10 WHITE PARKING LIGHT OUTPUT
Locate the parking light output wire at the vehicle’s light switch.
Verication: This wire registers positive voltage when the parking lights
are turned on.
Positive switching Parking Lights:
Connect the WHITE/RED wire to a 15 Amp max fused battery source.
Connect the WHITE wire to the parking light output wire.
Negative switching Parking Lights:
Connect the WHITE/RED wire to a good chassis ground.
Connect the WHITE wire to the parking light output wire.
4 BROWN/BLACK UNLOCK SWITCH ( 87A )
Refer to the Door Lock Section on page 11 of this guide.
5 VIOLET/BLACK UNLOCK POLARITY ( 87 )
Refer to the Door Lock Section on page 11 of this guide.
6 WHITE/BLACK LOCK SWITCH ( 87A )
Refer to the Door Lock Section on page 11 of this guide.
7 GREEN/BLACK LOCK MOTOR ( 30 )
Refer to the Door Lock Section on page 11 of this guide.