Owner's Manual
Table Of Contents
- Owner's Guide
- Installation and Reference Guide
- Table of Contents
- Before You Begin
- Wire Connection Guide
- Additional Ports
- Set Up & Programming
- Transmitter Programming - Feature Bank 1
- Manual Feature Programming - Feature Bank 2 & 3
- Manual Feature Programming - Feature Bank 4 & 5 - N/A
- Shock Sensor Programming, Adjustment and Testing - Feature Bank 6
- Code Alarm Utility App Feature Programming / Firmware Updates (optional)
- Dome Light Delay / Theater Dimming
- Chirp Delete - User Accessible
- User Selectable LED
- Feature Descriptions
- Transmitter Button Functions
- Security Trigger Zones
3
2019 Voxx Electronics Corporation. All rights reserved.
Before You Begin
Thank you for trusting Code Alarm products! If you are a consumer, please note:
Professional installation is strongly recommended.
This manual assumes the installer has adequate knowledge of the following
expertise, and as such, it does not cover these topics in detail:
12-volt electronics
Testing and verifying circuits
Making safe and lasting wiring connections
Factory ignition, power, lighting, data bus and sensing systems
Factory systems and components to avoid
Safe wire routing, circuit protection and product placement
Accesstovehicle-specictechnicalinformation
In addition, this manual assumes the installer has the proper tools, skill and
facilities to perform a professional installation.
Performing an improper installation could void your vehicle warranty and/or
result in damage to the vehicle or its components, improper system function,
unsafe vehicle operation or physical injury.
If you are an authorized Code Alarm installation technician, please use this
manual as a more detailed addendum to the Installation Quick Reference Guide
that accompanies the Code Alarm system. You can download a printable PDF of the
quick reference guide at voxxuniversity.com.
Technical Support (800) 421-3209
or go to
www.voxxuniversity.com