Owner's Manual
Table Of Contents
Set Up & Programming
Transmitter Programming - Feature Bank 1
1.
Turn
the ignition ON.
2. Press
and
hold the
valeVoverride
button.
3.
Within 10
seconds
the
system will chirp (3)
three
times.
4.
Press 1 button
of
each
transmitter
you wish to
program.
5.
The
system will
respond
with 1
chirp
for
each
accepted
transmitter.
6. Pressing the
override
button
at
anytime
during
programming
will
advance
to
the
next
bank.
NOTE:
The
system will
exit
transmitter
programming
after
15
seconds
of inactivity.
NOTE:
This
system
has
1
button
programming
which
programs
all
channels
of
the
system.
NOTE:
The
system
will
hold
up
to 4
transmitters
in memory,
programming
a 5th
transmitter
will
erase
the
oldest
transmitter
in memory.
Manual Feature Programming - Feature Bank 2 & 3
1.
Turn
the ignition
ON.
2. Press and hold
the
valeVoverride
button.
3. Within 10
seconds
the
system
will chirp (3)
three
times.
4.
Use
the
valeVoverride
button
to
advance
through
each
option
bank.
For
feature
programming
advance
to
Feature
Bank
2
or
3,
which
is (4)
four
or
(5) five
chirps.
5. Use the
transmitter
tJ button to scroll
through
the
selections
in
each
feature bank, the
system
will
chirp
to
match
the
feature
number.
6. Press the
transmitter
(!J
button
to
change
the
desired
feature.
The
LED
will
flash
indicating
the
changed
feature.
2010 Audiovox Electronics Corporation. All rights reserved.
11